Features:

Desktop HV power supply with 1 or 2 channels
Equipped with CPS, DPS or EPS HV modules (data see there)
Output voltages 500 V up to 30 kV
Output power up to 60 W
High precision output voltage with very low ripple and noise
with DPS modules
Free configurable
LED display for voltage or current, switchable
Voltage setting via 10 turn potentiometer or
Analogue I/O on D Sub 9

Description:

The inxpensive and robust desk top high voltage power supplies are
assembled out of the well known high voltage modules of the CPS, DPS
and EPS series.
The units are available with 1 or 2 high voltage modules in many combinations.
The control of the output voltage is made by the 10-turn potentiometer or
via the analogue I/O (set voltage and monitor voltage 0 to 5 V) on a D Sub 9
connector on the rear.
Output voltage and current can be choosen on a switchable LED-display.


1-channel and 2-channel versions with:
- high voltage modules CPS series
  500 V up to 10 kV / max. 12 W - output power or
- high voltage modules DPS series
  500 V up to 6 kV / max. 12 W - output power, with
polarity switchable, very low ripple and noise and very high stability


1-channel versions with:
- high voltage modules CPS series
  15 kV up to 30 kV / max. 12 W - output power or
- high voltage modules EPS series
  500 V up to 10 kV / max. 60 W - output power

For more technical data see the description of the according modules.

The units are supplied with AC/DC-converter:

- up to 24 W output power
with a wide range supply (100 to 240 V-AC) and
- up to 60 W output power
switchable supply (230 V-AC resp. 110 V-AC).